Beacon

What is the Beacon?

The Beacon is our slim vaporizer C-Core pen! This is a powerful extract vaporizer packed into a familiar, sleek shape. While it may look like any regular Ooze pen, it features the Onyx Atomizer for an incredibly efficient and flavorful experience.

We hid a dab tool right under the mouthpiece, so this is an all-in-one tool. Don’t let a dead battery kill your vibe, plug the Beacon in and you can vape while it’s charging. Every puff from the Beacon is 100% heavy metal free!

• Powered by the C-Core Onyx Atomizer
• Faster Heating. Better Flavor. Smarter Vape.

Learn all about the Ooze C-Core Collection and Onyx Atomizer technology here!

The Ooze Beacon Features:

Great Battery Life	Sleek Wax Pen
Sub-Ohn Vaping 14mm Water Pipe Adapter	Onyx Atomizer
Pass-Through Charging	100% Heavy Metal Free Vaping

How to Use the Beacon

Before using your Beacon for the first time, register your device to activate the warranty. Your authenticity code can be found on the card in the Beacon package.

1. Twist the mouthpiece to open the device.

2. Load your dab into the Onyx Atomizer. You can use the small dab tool under the cap, or use a Hot Knife!

3. Replace the mouthpiece cap and click the button 5x to turn it on.

4. Select a temperature by clicking the button 3x and you’re ready to dab!

How to Use Manual Mode

The Beacon offers two ways to heat up the Onyx Atomizer and take your hit. Manual Mode is the traditional method. Once you’ve loaded your dab and selected your temperature, simply press the button to heat the device as you inhale.

How to Use Sesh Mode

If you prefer not to hold the button down while you vape, use Sesh Mode! Once your dab is ready to go, click the button twice and the Beacon will heat continuously for 15 seconds.

Great Tasting Dabs with the Beacon

The Beacon is a Sub-Ohm Vape Device

The Onyx Atomizer has a resistance of 0.8 ohms, which is less than 1 ohm, making the Beacon an official sub-ohm vape! That low resistance means the core heats up super fast, producing more vapor with stronger flavors.

The Onyx Atomizer has an Innovative Airway Design

Use the power of your lungs to make sure every last bit of extract is vaporized! This special airway starts down on the atomizer’s thread, below the core heating dish. The air is pulled up into the core from below, instead of down through the mouthpiece. This circulates the air vortex through every centimeter of the chamber, leaving no concentrate behind!

Give Your Terpene Flavors a Boost

The Beacon is a flex temp device that has 3 different voltage levels to try out. Different terpenes taste stronger at different temperatures, so we recommend giving each level a try whenever you bring home a new strain of extract.

How to Clean the Beacon

Efficient Heat Means Easy Cleaning!

The Onyx Atomizer is SO efficient that it leaves barely any residue behind. The ceramic core is a flat dish, so there’s nowhere for your dab to pool and puddle in the bottom, creating a mess. Getting it clean again is as simple as adding a drop or two of isopropyl alcohol to the bucket and heating the device until the core dish is dry. Stop heating as soon as the liquid is vaporized; heating a dry coil can cause it to burn out. You’ll know it’s clean when you can see the blue Azul ceramic again!

For residue inside the mouthpiece, we recommend using Ooze Resolution Res Wipes. Use a cotton swab dipped in isopropyl to clean around the atomizer and soak the removable pieces in isopropyl.

How to Replace the Onyx Atomizer

Like all concentrate devices, your atomizer won’t last forever. When it just doesn’t taste the same no matter how deep of a cleaning you give it, it’s time to replace it with a fresh one. Grab a replacement Beacon Onyx Atomizer, unscrew the original atomizer and screw in the new one. We recommend keeping your old mouthpiece as a backup in case you ever misplace your new one!

How to Charge the Beacon

Vape While You Charge!

The Beacon includes a type-C charging cable that allows you to continue using the device while it’s connected to a power source. We call this pass-through charging. Charge the 800 mAh battery fully and enjoy rips all throughout the day. This thing has great battery life!

Always charge the Beacon with a wall adapter and charge using a wall outlet. Never charge it in a vehicle or use a port that is not connected to a wall to ensure your device remains covered under warranty.